164 timing.....??
what should the timing be for a 164 running unleaded with valvemaster octane boost additive, twin carb model(strombergs)...my tame mechanic is gonna set it all up on thurs but cant find any info for it..yet
|
timingof 164
I was given an Autobook manual for 160s when I got my 144. Not sure why, anyway - just had a look and it says the timing of the B30A engine should be 10 deg btdc when idling at 600 to 800 rpm with advance/retard hoses disconnected and plugged up. Plugs recommended are Bosch w200.T.35 gapped at .028 to .032.
Couldn't see any mention of a points gap though. Hope this helps. Martin |
164e with 3 carbs
Hello, does the timing of 10@700 rpms change when dealing with a triple carb set-up?
thsnk you, Quad |
You will need to time it by ear in that case. If the engine was stock then I would say keep to the original timing if you can't hear an engine.
We normaly just adjust timing untill the engine is right rather any set angle. |
All times are GMT +1. The time now is 16:44. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.