Everything you need and want!!!
 

i will have for sale very shortly the following parts for a 940


TTV flywheel with SACHS 707 cover and 850R friction plate(new) 300 SOLD
IPD anti roll bars 250
iIPD Turbo cam 200
BC RAXING BR series Coilovers with pillow ball top mounts 400 SOLD
custom 3" Powerflow exhaust with decat and 2 silencers (deep not loud) with 3" straight outlet 500
ALFA BRERA BREMBO FRONT BRAKE CONVERSION....Alfa Brera Brembo calipers painted grey with R decal, mounting brackets, 336mmXC90 discs, yellow stuff pads and stainless HEL lines done a few hundred miles , will need 17" wheels 900
KL RACING INTERCOOLER for A/C car painted matt black 200
Full Do88 hose set excluding AFM hose in black 200
960 AFM with Do88 silicone hose and RAMAIR filter 150
17" Lenso EAGLE 2(BBS STYLE) with Bridgestone Potenza 205/40/17 front and Maxxis 226/45/17 rear all recent ET35 with 20mm spacers ,need a refurb 400
GRIPPER LSD 500
M90 manual box 200
GENUINE BOSCH IACV (224 new) 100
UPPER AND LOWER FRONT STRUT BTACES 100 SOLD
FACTORY 940 FLOORMATS in lovely nick 80
4 x VOLVO PERFO 16" ALOYS 150 crap tyres
unpainted EGG CRATE GRILLE 100
CHIPPED GOLD EZK 100
OWEN DEV HYBRID 19t TURBO SETUP including Turbo, fuel rail with BOSCH 550cc injectors, ported manifold and 3" downpipe 1000
940 front bumper in dark metallic blue 100
MINT NS HEADLIGHT for late 940 80

So there you go, everything need to turn your 940 into a weapon! anyone wanting multiple parts will do a deal. parts should be available as of next week once they are removed. Collection from Watford or possibly Gloucester will post smaller parts
Damo

PM'd regarding the ARB's, exhaust and possibly the LSD.

Hi Damo.

I could be interested in the Cam and the Chip if these are available and funds are available too..

Would these fit my later 2.3lpt?

Cheers,
Kelv

coilovers and strut braces , clutch and flywheel SOLD

yea they are from an LPT but not much point buying the chipped EZK unless you doing turbo etc and you chip the ECU

Okay, thank you for your honesty. :regular_smile:

The cam would make a big difference though...

My only modification so far is a larger exhaust and an MBC - would the cam be suitable?

What size anti roll bars are they?

not sure. have a look at the IPD website....

yea, its a good mod. the LPT runs out of torque at 4500 rpm due to the cam. with this cam it revs freely to 6/7000 rpm. you will defo feel the difference .This and a bigger front mount intercooler should see at least 25 bhp but will put you in good stead for further mods down the line like turbo and injectors...depending on what you were intending to do

Thank you.
I'm not intending on going for massive gains just yet, maybe further down the line....

Hi Damo

Sent you a PM re floormats

Cheers

I call it Volvo V-tec as you get to about 4krpm and you get a boot up the backside from the camshaft kicking in.

Had a look and searched through some turbobricks forum posts- it appears that IPD offered various sizes for the rear bar over the years- if you could give it a quick measure, I would appreciate it.

Depending on the size, I will be interested :)

Kind regards,

Nat

I'll take the ipd roll bars damo. I'll Message ya

Thanks lee

sold mate sorry

sold
 

factory floormats and exhaust SOLD

How come you're breaking it Damo? You put a lot of work in to it!

engine beyond economical repair mate, been overboosting ad lifted the head....i have lost the love. i can't put any more money into the car, it has not been kind to me considering the love and care i put into it, i am gutted but will be cheaper in the long run....

eXHAUST AND DIFF SOLD

Hi Damo.

I've tried private messaging you but it doesn't seem to work.
Can I WhatsApp or email you? Or can you try and PM me.

My number is 07809847466

Nathan Long

Says you've reached max PM's, when would you be available for me to come and buy that cam? I'm only 45 mins from you.

camshaft sold

i also have an instrument cluster with 162k showing 100 pounds
used stock 940 turbo front discs pads calipers, carriers with new sliding pins and very recent discs and pads 50 ounds

Gold EZK still available?

Hi,
Do you have the heater matrix available - I know it's not on the list, but just hoping....If so how much and could I collect from Gloucester please?
Thanks
Andrew

Cancel last message - Luke (360Beast) put me on to Nissens who are still producing them so I have ordered a new one. - Thanks Luke!

i also have a good propshaft and brand new bearing and carrier, and a brand new Elring HG set with stronger B200 bolts if anyone needs? Oh and practically new ORIGINAL VOLVO expansion bottle

turbo setup gone!

Is the EZK still available?

wheels
 

https://i.imgur.com/vHPk2ZD.jpg

https://i.imgur.com/ywLNFPH.jpg

need a refurb now, but still half decent....400 pounds

sold sorry

Wheels look good Damo - do you have a price in mind?

Also, seeing as your car is the same colour as mine, do you have any other parts or has the car now gone..?

Cheers,
Kelv

the shell has goner now, sorry. Price is 400 for the wheels. They have 315/40/17 Bridgestone Potenza on front and 225/45/17 Maxxis on the rear all with at least 5mm of tread. No buckles etc. They come with 20mm spacers all round to bring them to ET15

brake kit
 

pic of the brake kit...

https://i.imgur.com/XxgmTcd.jpg

thanks to all who have bought gits...
i still have left...

1. Big brake kit
2. Full do 88 black silicfone hose ki4.
3. a mint used o/s headlight
4. a speedo cluster

Interested in the headlamp if you're open to offers :) They go for £50 on ebay :)

Cheers

Bloomin heck I was selling them for around £30!

Me too :shocked:

A breaker is now asking £120+ postage for egg crate grille :shocked: