|
S80 '98-'06 / S60 '00-'09 / V70 & XC70 '00-'07 General Forum for the P2-platform S60 / V70 / XC70 / S80 models |
Information |
|
Removing the front bumper coverViews : 165823 Replies : 60Users Viewing This Thread : |
|
Thread Tools | Display Modes |
|
Dec 6th, 2012, 10:33 | #1 |
Member
Last Online: Mar 2nd, 2021 15:56
Join Date: Dec 2004
Location: Knebworth
|
My headlamp bulb clips have come adrift and as the local gynaecologist is busy at the mo I'll have to remove the headlamps to get access to refit them. This guide helps a lot, thanks.
__________________
2013 S80 SE D3 Silver 176500 miles. 2007 S80 Executive D5 Black 241000 miles 2010 S80 SE D3 (Sold to WeBuyAnyCarMugs) |
Dec 6th, 2012, 22:38 | #2 |
Senior Member
Last Online: Jun 2nd, 2019 22:26
Join Date: Jul 2011
Location: Sheerness, Kent
|
Thanks for write up, changing my headlight in the morning.
|
Jul 12th, 2013, 19:45 | #3 |
Junior Member
Last Online: Mar 21st, 2019 13:38
Join Date: Sep 2012
Location: wales
|
bumper
good point about leaving the torx screws in the bumper to rerlease the catch .. most hhave take the screw out and pulled the bumper off and breaking the plastic!
|
Jun 16th, 2014, 16:28 | #4 |
New Member
Last Online: Feb 2nd, 2024 14:31
Join Date: Jun 2014
Location: Woodhall Spa
|
This is very useful, does anyone know what size Torx I need to do this job? I've got the 10 and 12mm sockets but I'll need to buy the Torx.
Thanks, Martin.
__________________
I'm too old to know everything! |
Jun 16th, 2014, 16:34 | #5 |
Master Member
Last Online: Yesterday 16:24
Join Date: Jul 2013
Location: Derry
|
You can buy a set of torx bits for a reasonable price. This should give you all the sizes you need..
|
Nov 21st, 2014, 18:49 | #6 |
Premier Member
Last Online: May 1st, 2024 23:09
Join Date: Dec 2011
Location: Southampton
|
I have just been directed here by Simon Jones as I need to remove my bumper to fit some strobes behind the grill so another thank you to Cavey for the how to.
|
Jul 9th, 2015, 18:44 | #7 |
New Member
Last Online: Jul 17th, 2015 00:24
Join Date: Jul 2015
Location: Nuneaton
|
|
Mar 20th, 2019, 13:28 | #8 |
New Member
Last Online: Apr 16th, 2019 12:01
Join Date: Sep 2017
Location: Belfast
|
thanks
thanks need to fix bonnet catch sticking
|
Apr 6th, 2019, 14:54 | #9 |
Junior Member
Last Online: May 16th, 2020 19:42
Join Date: Apr 2019
Location: Pontypool
|
I need to replace a cracked headlamp unit so this is going to be very useful. Thank you from me, even though I have only just arrived here and did this ages ago!
__________________
S60 2.4 D5 2006 Manual 84000 miles |
Aug 10th, 2009, 19:54 | #10 |
Junior Member
Last Online: Oct 22nd, 2009 22:39
Join Date: Apr 2009
Location: Belfast
|
Thanks for the info. Does this same procedure suit 04 S60. Previous owner gave the front bumper a knock and now the bumper return pops out on the drivers side. I can push it back in flush but after a few miles out again. I want to take a look to see if I can fix.
Thanks |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
|
|