Removing the front bumper cover
I have been asked to post this, again this job was how I did it on a s60 2002.
first remove the black trim on the bumper using a wide blade screw driver or similar tool be gentle!!!!. Undo the bolts x2 holding the bumper cover (12mm socket) inside the wheel arches you will see a torx screw ( sorry can't remember the size) undo this untill you have just a few threads left holding it on then push the whole screw in, (this pushes the catch holding the bumper cover) which releases the rear edge. Now look above the grill you will see 5 I think push button catches. Push the centres with a small screw driver and remove the catches. The Bumper cover should now be ready for removal dont forget to undo the fog light wires I think thats about it. ( always be gentle) If you need to remove the headlight you will now need to undo the black plastic assembly which holds the bumper rear catch, (if you have got this far you will see what I mean) quite hard to explain without a picture, 2 torx (can't remember the size sorry) and 2 bolts (10mm socket). The head lights are held in by 4 bolts (10mm) I refer to the spanner / socket required and not the bolt diam to make things easier for you. Again next time I do a job I will photograph it to make it easier for everybody. As I said at the start this is the way I did the job it is not set in stone but use only as a guide. As with any job in the motor industry do not attempt if you have any doubts of your own capability. Having said that its a doddle to do and should take no more then 10 / 15 minutes. Hope this guide has been of use to somebody. Wheel hub to do this weekend I will post a guide after if it will be of any use to anybody. All the best Cpt..... |
This has quite clearly been no use to anybody as not one person has commented, oh well it was posted in good faith ill keep my comments to myself in future.
|
Sorry Cavey,it was me who asked via the profile thingy.your guide is very much appreciated mate,I shall be removing my bumper over the next few days to fit grill to lower parts hopefully that should protect the radiator.
|
Thread stuck as I think a number of us will find this useful!
|
Many thanks.
|
Well Cavey now I must take off bumper to fix as some to**er has wrecked my grill by trying to steal it.
http://i97.photobucket.com/albums/l2...s/DSCN0064.jpg http://i97.photobucket.com/albums/l2...s/DSCN0063.jpg http://i97.photobucket.com/albums/l2...s/DSCN0058.jpg http://i97.photobucket.com/albums/l2...s/DSCN0057.jpg |
What scum if you find out who it was let us know and we can pop around for a freindly chat if you know what I mean Wink Wink!!!
|
Front Bumper Removal
Quote:
Many thanks. Also, please remember that this sort of info is often referred to many moons after it is posted! |
captcaveman - do not despair - I have just found it useful!!
I need to do this on my V70 to get into the wiper motor and hadn't sussed the screws in the wheel well!! Many Thanks Iain |
Quote:
|
All times are GMT +1. The time now is 11:01. |
Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.