abs or brake control module
 

Hello again , now I do suffer from connection on my BCM (brake control module) as it sometime can loose contact and cause immobilizer or brake failure on dash every time when I re-plug plug on couple attempts it is start work as normal apart of traction control or ABS witch still shows on the dash as light in yellow , last time I manage plug and still have just traction control light on . My question is may be some one knows what pin on the plug it is or what I can do to stop happening that plug loosing connection. Thank you.

Any one knows how to clone ABS module whit vida ?

You can't clone with vida. You can with vdash if you want or copy the eeprom from your bcm to the donor

It is probably cracked solder joints in the BCM due to heating and cooling every day for years. the 850 had similar problems on some cars.

Hello , Thank you do you know how to ? step by step ? if yes please can you explain.

Thank you , it is was (before me ) opened as there have aluminium cover when I open there no any sign off bad solder I done some re solder on the contacts I would say two months ago but now I suffer again . I do bought another abs unit whit same part number and just need clone that is my last option if that not make this car run on the thrust I will give it to fire brigade.